Click to enlarge
Chemical Resistant Grade
Back to products
M24 grade Conveyor Belt

Rubber Conveyor Belt

Width: Up to 2500 mm in single Up to 4000mm with longitudinal joint

 Length : Open or endless up to 400 meters in single length provided the diameter does not exceed 10 ft.

 Plies : 1 plies to 8 plies

Category:

Description

Type of Fabrics & their features:

 Nylon/Nylon (NN) Carcass:

NN 100, NN 125, NN 150, NN 200, NN 250, NN 300, NN 350. NN 400 and NN 450.

  • Lower longitudinal elongation
  • Higher tensile strength
  • Good flexibility and trough ability
  • Good resistance to mildew, moisture and rotting
  • Good resistance to edge wear
  •  Excellent impact resistance
  • Unaffected by alkalis and weak acids
  •  Suitable for conveying material over long distances

 Polyestor/Nylon (EP) Carcass:

EP 100, EP 125, EP 150, EP 200, EP 250, EP 300, EP 350, EP 400 & EP 450

Besides having the advantages as listed for NN carcass belts, EP belts have the additional advantage of lower longitudinal elongation.

Cotton/Cotton (CC) Carcass:

  • 28 OZ, 32 OZ, 36 OZ, 42 OZ, 48 OZ and 34 OZ.
  • Suitable for most applications
  • Good bonding for rubber
  • Good fastener holding properties

Cotton/ Nylon (CN) Carcass:

  •  Good troughability
  •  Resistance to longitudinal tearing and damage due to edge turn up
  •  Improved resistance to impact damage.
  • Lighter in weight
  • Better mechanical fastener holding properties

Type of Edges

Type of Edges : Available in cut edges and molded (protected) edges.

Skim Coated : The belts are processed with all its fabric plies skim coated with superior quality rubber compounds.

Mildew Inhibition: The rubber compounds used in the belts are designed such as to have full protection against mildew

Breaker Ply : To with stand extra impact during service the belts are provided with breaker ply on demand.

 Belt Designation : Available in three types i.e. General Duty (GD), Heavy Duty (HD) and Extra Heavy Duty (EHD).

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rubber Conveyor Belt”

Your email address will not be published. Required fields are marked *

Related products

Chemical Resistant Grade

The formulation of this cover grade is specifically designed to resist to most of the chemicals including chlorinated compounds, acids & bases, coolant oils etc. these belts are manufactured with materials that do not allow belt to disband, swell or flake, thus making it appropriate to convey corrosive materials that comprises acid & alkalies

Food Grade Conveyor Belt

This off-white colour cover grade is specially manufactured from suitable non-toxic elastomers & is completely odorless, recommended for carrying foodstuff like tea, bakery, medicines and confectionery etc. These belts are also used in Bucket Elevators for carrying various food products.

GRADE SHR (T2) Super Heat Resistant Conveyor Belt

GRADE SHR(T2): This cover grade is specially formulated with synthetic & natural rubber to provide superior heat & abrasion resistance. Generally used in hot mix plants, cement plants and foundries where conveying temperature is up to 180 deg * C for coarse and 160 deg * C fines material.

N17 Grade Conveyor Belt

GRADE N-17: Recommended for medium duty services to handle sized materials such as woodchips, lime, fine stones, gravel's etc. Recommended for temperature up to 80 deg *C

Oil Resistant Conveyor Belt

GRADE OR: This Specially formulated synthetic rubber cover grade is designed to provide protection to the belt against damage caused due to penetration of Greece, oil & fat into the belt. Resulting high performance, increased life of belt with zero operational problems.

Rough Top Conveyor Belt

The design of mesh-like pattern on the top surface cover can generate the relief effect, absorbing any vibrations and impacts exerted on the materials conveyed and simultaneously preventing the material from slip. Rough top belts are best suitable for transporting light weight goods, either being inclined or being horizontal, also suitable for transporting fragile or deformed materials and packed goods, such as glass, papers, bags, boxes or cartons at angle from 15° to 25° degree. The bareback Rough Top belt makes less friction coefficient, suitable for running over table and flat panel.

Sidewall & Cleated Conveyor Belt

IBC group presents from its vast range of HIGHLAND Conveyor Belts- the Corrugated Sidewall & Cross Cleat Conveyor Belts, It is one of the most effective way of elevating materials at highly inclined angle as cleats prevents loose material from rolling back and sidewall increases the carrying capacity & prevent material from falling through sides. Our rubber sidewall cleated belts are made from best quality rubber material which is carefully fabricated to create dimensionally accurate and very strong belt. Diversely shaped cleats are available: in straight & angular form with & without fabric-reinforced. Owing to its excellent functionality, superior strength and long lasting durability these rubber sidewall cleated belts are highly demanded in different parts of the globe.

Wavy Top Conveyor Belt

The Wavy Top Conveyor Belts are used where inclination angle is about 25 to 30 degrees and its wavy impression on top ensures smooth conveying of bags or boxes with avoiding backward sliding of material. These belts are best suitable for carrying unit loads, bulk solids and heavy material. Considering its requirement to handle tough conveying applications we manufacture these belts using high quality raw material and latest techniques. Wavy top belts are particularly used in loaders and weigh feeders for carrying bags & boxes in various Industries and warehousing purposes.